1-2
CCU-700A(UC)
CCU-700AP(CE)
1-2. Connectors and Cables
1-2-1. Connector Input and Output Signals
Main connector input and output signals are shown below.
Rear panel
BNC connector : 75
Z
[Input signal]
• RET 1 to 4
140 IRE (1.0 V p-p) VBS or VS, loop
through
• REFERENCE
40 IRE (300 mV p-p), VBS,
Burst sync. loop through
• PROMPTER
140 IRE (1.0 V p-p), VBS,
loop through
• DIGITAL RET 1,2 (When BKP-7312 is connected.)
D1 format serial digital, SMPTE 259
M/ITU-R BT.656
[Output signal]
• R
700 mV p-p
• G
700 mV p-p
• B
700 mV p-p
• Y
100 IRE, 40 IRE (sync)
(for CCU-700A)
700 mV p-p, 300 mV p-p (sync)
(for CCU-700AP)
• R-Y
700 mV p-p (75 % Color bars)
(for CCU-700A)
525 mV p-p (75 % Color bars)
(for CCU-700AP)
• B-Y
700 mV p-p (75 % Color bars)
(for CCU-700A)
525 mV p-p (75 % Color bars)
(for CCU-700AP)
• CHARACTER
210 mV p-p, 300 mV p-p (sync)
• WF 1, 2
100 IRE/140 IRE (ENC)
(for CCU-700A)
700 mV p-p/1.0 V p-p (ENC)
(for CCU-700AP)
• PIX 1, 2
140 IRE (1.0 V p-p)
• VBS 1 to 3
140 IRE (1.0 V p-p)
• SYNC
300 mV p-p
• DIGITAL OUTPUT 1,2,3 (When BKP-7311 is connected.)
D1 format serial digital, SMPTE 259
M/ITU-R BT.656
[Input/Output signal]
COAX
(Refer to Section 1-5.)
TRIAX
King type (for CCU-700A)
Fischer type (for CCU-700AP)
MIC OUTPUT CH1/CH2 (3P, MALE)
(EXTERNAL VIEW)
(0 dBu=0.775 Vrms)
No.
Signal
Specifications
1
MIC OUT (G)
0 dBu/-20 dBu
2
MIC OUT (Y)
(Selectable with S201,
3
MIC OUT (X)
S301/AT board)
RTS IN
RTS OUT
(3P, FEMALE)
(3P, MALE)
(EXTERNAL VIEW)
No.
Signal
Specifications
1
RTS (COMMON)
2.0 Vp-p 200
Z
2
RTS (ENG)
3
RTS (PROD)
1-2. Connectors and Cable
