Page 49 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
MADI:
For MADI, the sync panel provides according options to choose the clock input
source from MADI or Word Clock In.
In addition to the sync options, the panel provides access to the MADI settings of
the Wave I processor. The Input/Output option can be chosen from coaxial and
optical and the interface can be set to 64 channel TX mode. The 64 channel mode
only can be enabled if the connected device is configured accordingly and is
capable of automatically switch between 56 and 64 mode; otherwise the Wave 1
takes the setting of the connected device (PC or converter).
Warning:
•
The slave mode with MADI input can only be activated if a proper MADI input (Coaxial or
Optical) is selected (i.e. there is a sensible signal at the input of the Wave I processor).
•
If intermediate sound is heard, there is a problem of sync (not same for input and output
streams). This is an indication that the input device and the Wave I processor are both set as
Master.
•
If distorted sound is heard, there is a problem between master frequency of the Wave 1
processor and the input signal clock frequency. This can also occur in MADI with
inconsistent settings of the 64-channel TX mode.
•
When set to slave, if preferred sync is not available (e.g. no word clock connected and set to
word clock), the system automatically switches to available sync (i.e. MADI input).
