Page 41 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Right Tool Bar
Zoom:
On the topside are buttons for zooming in and zooming out the workspace.
Tip: You can zoom in and out with a mouse wheel.
Volume:
Here you can adjust the overall system volume. This controller corresponds
to the volume control on the WaveDesigner Equalizer window.
Mute:
Mutes all outputs.
Status Bar
The Status Bar underneath the main area shows some useful information about the
position grid. On the left side, the current mouse position is displayed as X and Y
coordinates in meters. When source is selected by clicking, the properties of that
source are displayed on the right side (Index, X, Y, Z, Angle, Distance).
The X, Y, angle and distance parameters can directly be edited in the status bar by
entering new values. If multiple sources are selected, the difference of old and new
value is applied as an offset to all selected speakers in Cartesian (X, Y) coordinates.
The Z option is disabled. It will be enabled in future versions of the software.
In Preset Status, you can see what preset is currently loaded.
Figure 1.28
Figure 1.29
