Page 34 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Equalizer
Each output or speaker has its dedicated parametric equalizer. When
in Selection Mode (page 27), Equalizer dialog can be opened via the
context menu by right clicking the speaker. This window can also be
opened in the menu bar: Window – Equalizer or through the button in
the toolbar labeled “EQ”.
The main area of the EQ panel shows a plot of the frequency response for the
selected speaker.
On the left side is a control box for general options:
Speaker Selection:
This section has two dropdown boxes for selecting the speakers.
The first dropdown box allows selecting a specific subsystem or all subsystems at
once.
The second dropdown box provides a limited list of speakers identified by their index.
This list corresponds to the selected subsystem or all speakers if “all” is selected in
the first dropdown box. Selecting a speaker retrieves the corresponding EQ controls
from the Sonic Wave I processor or the local status if a Sonic Wave I is not
connected. The user can then modify these settings interactively.
Figure 1.22
