Page 57 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
/SetSubSystemDirectOutOn/SrcId/SubsysId (SrcIndex 1-24, SubsystemIndex 1-4)
Enables direct out for source SrcId and subsystem SubsysId.
e.g. /SetSubSystemDirectOutOn/4/1
/SetSubSystemDirectOutOff/SrcId/SubsysId (SrcIndex 1-24, SubsystemIndex 1-4)
Disables direct out for source SrcId and subsystem SubsysId.
e.g. /SetSubSystemDirectOutOn/4/1
/SetSubSystemDirectOutChannel/SrcId/SubsysId/Output (SrcIndex 1-24,
SubsystemIndex 1-4, OutputIndex 1-64)
Selects direct out speaker number for source SrcId and subsystem SubsysId.
Warning: there is currently no check if the speaker belongs to corresponding
subsystem. This functionality must be handled with care.
e.g. /SetSubSystemDirectOutOn/4/1
EQ control
The following controls provide a low level access to all functionalities of the Input EQ
section of the Wave I Processor. It mimics the behavior of the EQ Panel in the
WavePerformer. Please note that the values there are not constantly updated for
stability reasons. The panel should be exited and reentered for displaying the
transferred values from OSC.
/SetInputEQControlAllOn
Activates the control all feature of the EQ, similar to the control all checkbox in
WavePerformer. If enabled, all following commands are applied to all input
channels, not regarding the passedSource Index.
/SetInputEQControlAllOff
Deactivates the control all feature of the EQ, all following EQ commands will only
be applied on the given Source Index.
/SetInputEQBypassOn/SrcId (SrcIndex 1-24)
Enables Bypass mode of the Input EQ for the given Source
e.g. /SetInputEQBypassOn/7
/SetInputEQBypassOff/SrcId (SrcIndex 1-24)
Disables Bypass mode of the Input EQ for the given Source
e.g. /SetInputEQBypassOff/7
/SetInputEQBandOn/SrcId/BandId (SrcIndex 1-24, BandIdex 1-8)
Activates the parametric EQ filter for the given Source and band number.
e.g. /SetInputEQBandOn/1/2
/SetInputEQBandOff/SrcId/BandId (SrcIndex 1-24, BandIdex 1-8)
Deactivates the parametric EQ filter for the given Source and band number.
e.g. /SetInputEQBandOff/21/5
/SetInputEQBandFrequency/SrcId/BandId float (SrcIndex 1-24, BandIdex 1-8,
frequency in Hz 20-20000)
Sets the frequency of the parametric EQ filter for the given Source and band
number.
e.g. /SetInputEQBandFrequency/1/6 1200.0
