Page 14 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
4. System Configuration
Software Installation
The Wave I configuration software package (Windows XP & 7) is made to set up
and control your system and create presets. To start the installation process, double
click on the file you will receive per email or downloaded from the Sonic Emotion
FTP Server. Alternatively, insert the Wave I configuration CD into your computer
and start the installation by double clicking on the Wave I configuration icon “config”
(software is part of the system delivery). The installer will put both WaveDesigner for
the system setup and WavePerformer for the control of the system on your PC.
PC Configuration
Before running the applications, the PC network settings must be set-up to enable
the control of the system.
1.
The Sonic Wave I processor can be controlled either by a LAN or a WIFI
connection. Make sure the unused connections are disabled.
2.
Turn off the firewall
Go to: Start -> Preferences -> Windows Firewall
If you have third party firewalls installed, please make sure that they are
turned off as well.
3.
Make sure that the IP Address of your PC is set manually and is in the same
range as the Sonic Wave I Processor. By default, the PC can be set to any
IP address 192.168.0.1 – 192.168.0.254, except of 192.168.0.200. Any WIFI
router used must also be in the same IP range.
The default IP address of the Sonic Wave I Processor is 192.168.0.200. It
can be changed on the processors display menu (page 12).
4.
The Subnet Mask has to be: 255.255.255.0
Go To: Start -> Connections -> All Connections -> LAN or WLAN-
Connection (regarding what connection you are using)
Then double click “Internet protocol (TCP/IP)”
