Page 28 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Add Speaker Array
and
Test tool
. These tools are described on page 28 and
30.
Zoom:
On the lower side, there are buttons for zooming in and zooming out the workspace.
Tip: you can zoom in and out with a mouse wheel.
Add Array Dialog
Linear Array:
With the Linear Array option, the speakers are aligned in a
straight line. The number of speakers, the overall length of the
line and the coordinates of its center point can be defined.
Orientation sets the orientation of the loudspeaker array.
In a loudspeaker setup where speakers are mounted to the walls
of a room with even distance, the Array Dialog gives an easy
way to define the setup for the Sonic Wave I processor.
All values are referenced to the 0,0 point.
Circular Array:
The Circular Array option gives the possibility to add multiple
speakers in a circular alignment. There are controls to set the
number of speakers, the radius of the circle, center point
coordinates and start and end angle of a section.
In this way, loudspeakers can be automatically aligned either as full circle or only as
an arbitrary portion defined through start and end angle.
All values are referenced to the 0,0 point. Angle 0 is given towards the Y positive
axis in counter clockwise order.
Figure 1.17
