Sonic KCS-3500, Руководство по эксплуатации

Страница: 66 / 102

7-4
・
Part Names of HPC-2PCB
・
7-Segment LED Information
While the system is running, a 7-segment LED displays the following information after the power is
turned ON:
(1) HPC-2 software version information (displayed for about 1 second)
(2) The information of the type name and size of the hoist unit (displayed for about 1 second)
(3) The hoisting amount, roll angle, pitch angle and turning amount (status in normal use)
The standard values displayed on the 7-segment LED are as follows: The actual display may differ
slightly.
Upper Limit Lower Limit
HOIST
00 (HEX) 7F (HEX)
Right Limit Center Limit Left Limit
BEARING
F8 (HEX) 00 (HEX) 08 (HEX)
0 (deg) 90 (deg)
TILT
00 (DEC) 90 (DEC)
20 (deg) 0 (deg) -20 (deg)
ROLL,PITCH
20 (DEC) 0 (DEC) 20. (DEC)
Note 1) The dots displayed on 7-segment LED represent "minus."
Note 2) The turning amount and depression angle amounts are displayed when the HALF LED is
ON and the X-Y LED is OFF.
Power LED
* From the top
+12V
+5V
+24V*only half-round
LED for Information
See the table.
7-Segment LED
See the table.
Power Switch
* Switching between
Auto and Manual
Rotary Switches
Manual Switches
*From the left
Up and Down
Turning *only half-round
Depression Angle * only
half-round