Sonic KCS-3500, Руководство по эксплуатации

Страница: 33 / 102

5-7
[How to operate the registered preset key]
On the preset screen, the registered function and the present setting are displayed. When
you want to change the setting, put the cursor in the frame of the reservation screen and then
press the event key
. Each time you press the event key , the next higher set
will be selected (Set 1 → Set 2 …). The content of each function setting is shown in the
table below.
Each time you press the event key
, the next higher set will be selected.
Reservation
menu
Set 1 Set 2 Set 3 Set 4 Set 5
TM/RM
RM
Heading
RM True
bearing
TM True
bearing
NET CAST
(Note 1)
NET SET
(Note 2)
DISCRI Soft Medium 1 Medium 2 Hard 1 Hard 2
PP FILTER Soft Medium 1 Medium 2 Hard 1 Hard 2
TX POWER Any value from 0 to 10 can be set.
TX PULSE Any value from 1 to 10 can be set.
TX SYNCRO Internal External
TX CYCLE Any value from 40 to 800 can be set.
SONAR AREA
Full
screen
Horizontal Multi
Fish
finder
Audio
SUB AREA 1 Non Event
Depth
wind
Shortcut
1
SUB AREA 2 Non Event
Depth
wind
Shortcut
2
SUB AREA 3 Non Net info. Event
SUB AREA 4 Non
Temp.
graph
Current
info.
Event
AUDIO VOL Any value from 0 to 10 can be set.
RC
BRIGHTNESS
BACK LIGHT
KEY
Any value from 1 to 10 can be set
RC
BBRIGHTNES
S KEY
Any value from 1 to 10 can be set
WAKE RESET
Whenever event key pushed, the wake mark drawn on the scan
image is reset
Note 1: The Setting Details of “Casting net mode” is described in “5. 3. 2. NET
CAST.”
Note 2: The Setting Details of “Net Set” is described in “5. 3. 3. NET SET.”
The setting changes each time the menu key is pressed.