Sonel PAT-800, Руководство по эксплуатации

Страница: 22 / 60

OPERATING MANUAL PAT-800/805 version 1.09 20
Press START .
Read the result.
Symbols
and
are blinking.
Symbol indicates the need for visual inspection on the tested device. Please check the
power cord insulation, quality of housing and mains plug (for cracks or damages) etc.
Press ENTER , if this test is
successful ( is displayed) or
STOP/ESC , when the test result is
negative ( is displayed).
Symbol indicates the possibility to check the fuse removed from the tested device.
Contact the fuse with the test points. The efficiency of the fuse
is indicated by displaying
and an acoustic signal.
Notes:
- Tested device must be turned on.
- R
L-N
measurement is intended for resistance objects, in case of inductive objects, the result may be
burdened with an additional errors.
- Fuse test is possible when
READY message is displayed.
- Do not touch the two metal ends of the fuse with your fingers during the test, because a blown fuse
may be diagnosed as good.