Sonel PAT-800, Руководство по эксплуатации

Страница: 42 / 60

OPERATING MANUAL PAT-800/805 version 1.09 40
Use , to set the
number of chosen test and
confirm by pressing
ENTER .
Use , to select the
device class and confirm by
pressing
ENTER .
Now you can choose performing of individual measurements for a given test and class.
Use and to choose performing the
measurement ( ) or cancel it ( ).
To change the parameters of the active
measurement press
SET . Set the next
parameters as in section 4.2. Confirm by
pressing ENTER . Use to activate and set
parameters of the next measurement.
In this way, you may program the test by activating measurements in the following sequence: an
initial measurement → R
E
→ R
ISO
→ I
SUB
→ I
PE
→ I
∆
→ I
T
→ S.
After approving the last change by
pressing
ENTER press it two more times
and the meter will enter standby mode
displaying the following screen.