DKC400Y AC Sliding Gate Installation Manual www.solavis.com.au
Copyright © 2008 SOLAVIS
™
Doc: DKC400Y Installation Manual v1.1 page 3 of 22
IMPORTANT
— READ THIS FIRST
WARNING
This gate is dangerous if installed or used improperly. STAY AWAY FROM THE GATE
WHILE IT IS OPERATING. The gate can crush hands, fingers or toes, knock over persons
in the vicinity, and cause death if used improperly. KEEP CHILDREN AND ADULTS WITH
MENTAL IMPAIRMENTS AWAY FROM THE GATE. Children and adults with mental
impairments, who may not recognize the obvious dangers, are at particular risk and must
be kept away from moving parts of this gate. Damage to the gate or improper installation or
maintenance could cause additional hazards.
NEVER USE THE GATE IF IT IS DAMAGED.
SAFETY
This booklet will offer you information you may need to install your gear motor and to
safeguard your safety. However, caution is unquestionably indispensable and nothing is
better than preventing accidents.
WARNING:
any repair or adjustment of working machinery is strictly prohibited unless all
the necessary precautions (electrical supply disconnected and motor off) have been taken
in order to avoid possible accidents.
WARNING:
any repair must be carried out by qualified people.
WARNING:
All moving mechanisms must be provided with suitable protections.
WARNING:
Keep the automatic controls out of the reach of children.
WARNING:
Command pulses must be given from positions where the gate is visible.
WARNING:
Use transmitters only if you can see the gate.
Read carefully the instructions enclosed in this manual.
Keep this booklet in a suitable place well known to all interested people.
PRELIMINARY CHECKS
The following gate characteristics should exist for the opener installation to be successful:
The gate must be balanced
You must be able to carry out manual closing and opening of the gate without
any effort.
Make sure that the gate has a solid structure and that there is no friction points in
its movement.
The weight of the gate should not exceed 600kg.
Turn off all power to the gate opener until installation is completed.
