DKC400Y AC Sliding Gate Installation Manual www.solavis.com.au
Copyright © 2008 SOLAVIS
™
Doc: DKC400Y Installation Manual v1.1 page 14 of 22
Button 2
Button 1
Button 3
Button 4
Fig.7 Remote control
Adding extra remote controls (Learn):
Press the button ‘AN’ (See Fig.6 terminal 13) on the control board, then the ‘LED2’
will flash once, the beeper will ring for about 1 second. Then press the remote
control button which you wa
nt to use, the ‘LED2’ will flash on and off again and the
beeper will ring for about 2 seconds. The learning process is finished.
Up to 100 remote controls may be used.
Erase remote controls:
To erase all existing remote controls, press and hold ‘AN’ button, the beeper will ring,
release the button once the beeper stops ringing. This indicates that all the remote
controls have been erased completely.
