DKC400Y AC Sliding Gate Installation Manual www.solavis.com.au
Copyright © 2008 SOLAVIS
™
Doc: DKC400Y Installation Manual v1.1 page 13 of 22
11. Output power supply: AC24V
12. Power Indicator: LED
13. Learn button: AN
14. Force Adjustor (VR1): Clo, Counterclockwise
–
15. Power Transformer: DKC400Y: 220V/12Vx2 / DKC400UY: 110V/12Vx2
16. Sampling Transformer: 110V/8.8V 4W
17. Alarm Lamp: DKC400Y:AC220V / DKC400UY:AC110V
18. Motor Capacitor
19. Motor: U (com), V (Positive direction), W (Opposite direction), E (grounding),
RELEASE CLOSED
COM
OPEN
COM/U
V
W
SWITCH
REED SWITCHES
MOTOR
CL
COM
OP
U
C
C
V
W
E
Motor wiring
terminal
Control board
X2
Wiring diagram
20. Power Input: E (Earth), L (Live), N (Neutral) DKC400Y: AC220 / DKC400UY: AC110V
Control
The remote control works in a single channel mode. It has four buttons. See Fig.7
remote control. The function of button 1, button 2, and button 3 are the same. With
each press of the remote control button which has been programmed, the gate will
close, stop, open or stop cycle. Button 4 is available for pedestrian mode.
You can program/learn button 1, button 2 and button 3 individually. You also can
program/learn two buttons or three buttons together, but you need repeat the
program/learn process if you want to use more than one button.
