manualshive.com logo in svg

Solas TWENTY6 ST-26N, Руководство по установке и эксплуатации

Поделиться
Скачать
Solas TWENTY6 ST-26N Скачать руководство пользователя страница 37

solasfires.com

37

ASSEMBLY & INSTALLATION

Installing the Outer Panels  (con't)
8.  Attach the outer bottom panel to the outer side panels 

by aligning the fastener holes in the bottom panel with 

the PEM nuts in the front corners of the bottom flanges 

on the outer side panels. Insert and tighten the two 

philips head screws. 

 

 

 

 

 

 

 

 

 

 

 

 

9.  Reinstall the lower surround brackets if you removed 

them by inserting and tightening the two sheet metal 

screws in each bracket.

10.  Only trim kit(s) supplied by the manufacturer shall be 

used in the installation of this appliance.

Installing the Fireplace Surround with Integrated Screen
The decorative surround with integrated screen for 

the fireplace is held in place by four brackets. Two 

are located on the top of the fireplace and two on the 

bottom. There are mating brackets and catch plates on 

the surround itself. Refer to the adjacent photos when 

installing the surround.
1.   Unpack the surround with integrated screen from 

shipping box.

2.  With a helper, lift the surround with integrated screen  

up and identify the top by looking for the vertical  

brackets that are visible from the rear of the surround. 

 

 

 

 

 

 

 

 

 

 

 

 

3.  Move the surround with integrated screen into place, 

generally centering the surround opening over the 

glass panel. Keep the bottom of the surround tipped 

slightly away from the fireplace. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Back of Surround (top)

Vertical Brackets

Содержание TWENTY6 ST-26N





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды