solasfires.com
19
Box 3 Contents
ASSEMBLY & INSTALLATION
UNPACKING THE TWENTY6 WALL MOUNT FIREPLACE
The fireplace components are shipped in three cartons.
By now, you will have opened the top of the first carton,
removed the glass protector and this manual. The second
carton contains the fireplace surround. The third carton
contains the vent starter pipe, vent heat shields and air
and exhaust restrictors.
1. Using the adjacent images as a guide, first lift and
remove Box 1 from the carton containing the firebox.
Carefully unpack the contents of the tube and set aside.
This should include the bag of glass burner media,
the remote control handset, a hardware bag and relief
doors with gasket.
2. Next lift and remove Box 2 from the carton. Carefully
remove the contents of the tube. This includes the Top
& Bottom and Side Panels that will be attached to the
fireplace during assembly.
3. Next, remove all remaining packaging materials from
the carton.
4. Lift the firebox and the fireplace mounting plate as a
unit up and out of the carton. The best place to lift is at
sides. Remove the fireplace mounting template from
the face of the fireplace. You should now have all of the
parts as shown in the image below.
5. Next, unpack the vent starter pipe (with attached
gasket), vent cap insulation, the inner and outer
pass-thru vent heat shields and the air and exhaust
restrictors from the second carton and set aside for
later use.
6. Finally, unpack the fireplace surround from the third
carton and set aside on a soft surface for later use.
Box 1
Relief
Doors
Glass
Media
Outer Side P
anels
Outer T
op & Bottom P
anels
Remote
Remote
Wall Bracket
Hardware
Packing
Material
Restrictors
Starter
Pipe
Gasket
Box 1 Contents
Box 2 Contents
Box 2
Wall Template
Manual
Inner & Outer Pass-
Through Heat Shields
