SolarEdge SE7600A-US, Руководство по установке

Страница: 14 / 116

For additional information, refer to
https://www.solaredge.com/sites/default/files/storedge_wiring_quick_guide_and_on_
site_checklist_na.pdf
.
Installation Equipment List
Standard tools can be used during the installation of the SolarEdge system. The following is a
recommendation of the equipment needed for installation:
l
Allen screwdriver for 5mm screw type for the inverter cover, Connection Unit cover, and inverter side
screws
l
Standard flat-head screwdrivers set
l
Non-contact voltage detector
l
Cordless drill or screwdriver and bits suitable for the surface on which the inverter will be installed and
for opening the Connection Unit drill guides. Use of an impact driver is not recommended.
l
Appropriate mounting hardware (for example: stainless bolts, nuts, and washers) for attaching:
o
the mounting bracket to the mounting surface
o
the power optimizer to the racking (not required for smart modules)
l
Wire cutters
l
Wire strippers
l
Voltmeter
For installing the communication options, you may also need the following:
l
For Ethernet:
o
CAT5/6 twisted pair Ethernet cable with RJ45 connector.
o
If using a CAT5/6 cable spool: RJ45 plug and RJ45 crimper
l
For RS485:
o
Four- or six-wire shielded twisted pair cable.
o
Watchmaker precision screwdriver set
Inverter Transport and Storage
Transport the inverter in its original packaging, facing up and without exposing it to unnecessary shocks.
If the original package is no longer available, use a similar box that can withstand the weight of the
inverter (refer to the inverter weight in the specification datasheet provided with the unit), has a handle
system and can be closed fully.
Store the inverter in a dry place where ambient temperatures are -13°F - 140°F / -25°C - +60°C .
SolarEdge - StorEdge Installation Guide MAN-01-00262-1.3
12
Installation Equipment List