CAUTION!
HEAVY OBJECT. To avoid muscle strain or back injury, use proper lifting
techniques, and if required - a lifting aid.
CAUTION!
SolarEdge inverters can be installed at a minimum distance of 50 m/ 164 ft
from the shoreline of an ocean or other saline environment, as long as there
are no direct salt water splashes on the inverter.
1. Determine the inverter mounting location, on a wall or stud framing . It is
recommended to mount the inverter in a location protected from direct sunlight.
2. To allow proper heat dissipation, maintain the following minimum clearance
areas between the inverter and other objects:
NOTE
The Primary unit is longer than the Secondary Unit, therefore make sure
the mounting location is high enough to fit the Primary Unit and leaves
sufficient space for cable entry.
If installing a single inverter:
At least 20 cm (8") from the top and bottom of each unit. For the
Primary Unit, make sure to leave sufficient clearance for cable
entry.
3 cm (1.2") from the right and left of the unit.
If installing multiple inverters:
When installing inverters one above of the other, leave at least 40
cm (16") between inverters. When installing the Primary Unit ,
leave 40 cm (16") between the top of the Primary Unit and the
bottom of the Connection Unit.
When installing inverters side by side:
Chapter 3: Installing the Primary and Secondary Unit(s)
29
Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.2
