Sofarsolar HYD 10KTL-3PH Скачать руководство пользователя страница 5

Страница: 5 / 128

ABOUT THIS MANUAL

HYD 5K...20KTL-3PH

About this manual

This manual contains important safety information that must be

observed during installation and maintenance of the device.

Carefully read this manual before use and retain it for future
reference!

This manual must be treated as an integral component of the device.

The manual must be kept in close proximity to the device, including

when it is handed over to another user or moved to a different

location.

1.1

Copyright declaration

The copyright of this manual is owned by SOFARSOLAR. It may not be

copied

–

neither partially nor completely

–

by companies or individuals

(including software, etc.) and must not be reproduced or distributed in

any form, or with the appropriate means.

SOFARSOLAR reserves the right to final interpretation. This manual

may be amended following feedback from users or customers. Please

consult our website at http://www.sofarsolar.com for the latest

version.

The current version was updated on 20/07/2022.

1.2

Structure of the manual

This manual contains important safety and installation instructions

that must be observed during installation and maintenance of the

device.

Содержание HYD 10KTL-3PH

































































































































Результаты поиска

Содержание HYD 10KTL-3PH

Отзывы:

Sofarsolar HYD 10KTL-3PH, Инструкция по установке и эксплуатации, Страница: 5 / 128

Результаты поиска

Содержание HYD 10KTL-3PH

Отзывы: