58
EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
Annex I - 6.
SNMP configuration via Easy Config System
After logging in to Easy Config System on the DIRIS Digiware D-50 / D-70, you can find the SNMP settings in the SNMP
menu, under SNMP settings:
•
Community configuration SNMP V1 & V2:
-
SNMP V1 Read Community:
Read-only community string for SNMP v1. Default community string is “public”. It
allows a manager to retrieve read-only data from a device connected to the DIRIS Digiware D-50 / D-70.
-
SNMP V1 Read/Write Community:
Read-Write community string for SNMP v1. Default Read/Write community
string is “private”. It allows a manager to write (ex: position of a Digital output) to a device connected to the DIRIS
Digiware D-50 / D-70.
-
Trap Community:
The Trap community string allows the manager to receive notifications in case of an event and/
or alarm.
-
SNMP V2 Read Community:
Read-only community string for SNMP v2. Default community string is “publicV2”.
It allows a manager to retrieve read-only data from a device connected to the DIRIS Digiware D-50 / D-70.
-
SNMP V2 Read/Write Community:
Read-Write community string for SNMP v2. Default Read/Write community
string is “privateV2”. It allows a manager to change a setting (ex: position of a Digital output) in a device
connected to the DIRIS Digiware D-50 / D-70.
•
SNMP V3 configuration:
-
SNMP V3 Authentication Protocol:
If SNPM v3 is activated, you can choose an authentication protocol (MD5 or
SHA) to hash your password. For no authentication, select “None”.
-
SNMP V3 Encryption Protocol:
Choose between DES or AES privacy protocols for the encryption of data
messages. For no encryption, select “None”.
-
SNMP V3 Read Username:
Username enabling authentication for read-only functions.
-
SNMP V3 Read/Write Username:
Username enabling authentication for read and write functions.
-
SNMP V3 Read Password:
Password (also passphrase) accompanying the authentication and privacy
protocols, and allowing read-only functions. The length of the Read-only authentication & privacy password must
be between 8 and 16 characters.
-
SNMP V3 Read/Write password:
Password (also called passphrase) accompanying the authentication and
privacy protocols and allowing read and write functions. The length of the Read-Write authentication & privacy
password must be between 8 and 16 characters.
-
Trap configuration:
Choose to deactivate or activate the traps. If activated, you can choose to broadcast trap
notifications to all supervisers on the network or to notify only specific host stations (up to 2).
-
Trap Host 1 IP:
Enter the IP address of the 1st host station which will receive trap notifications.
-
Trap Host 1 port:
Enter the port used to send traps for the 1st host station.
-
Trap Host 2 IP:
Address: enter the IP address of the 2nd host station which will receive trap notifications.
-
Trap Host 2 port:
Enter the port used to send traps for the 2nd host station.
-
Trap notification cycle:
Enter the time after which a trap reminder will be sent for active alarms. By default, it is
set to 60min.
