5
EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
2. HAZARDS AND WARNINGS
The term "device" used in this document covers both DIRIS Digiware D-50 and D-70.
The assembly, use, servicing and maintenance of this equipment must only be carried out by trained, qualified professionals.
SOCOMEC shall not be held responsible for failure to comply with the instructions in this manual.
2.1. Risk of electrocution, burns or explosion
•
This device must only be installed and serviced by qualified personnel who have in-depth knowledge of installing,
commissioning and operating the device and who have had appropriate training. He or she should have read and
understood the various safety measures and warnings stated in the instructions.
• Before carrying out any work on the device, switch off the power supply to the device.
•
Always use an appropriate voltage detection device to confirm the absence of voltage.
• Replace all devices, doors and covers before turning on power to this equipment.
•
Always power the device with the correct rated voltage.
• Install the device following the recommended installation instructions and in a suitable electrical cabinet.
Failure to take these precautions could cause death or serious injuries.
2.2. Risk of damaging the device
To ensure that the device operates correctly, make sure that:
• The device is correctly installed.
•
The auxiliary power supply voltage indicated on the product is observed: 24 VDC ± 15%.
•
Use 230 VAC / 24 VDC SOCOMEC power supply (P15 15W 4829 0120) or use a 1 A 24 VDC safety fuse.
Failure to respect these precautions could cause damage to the device.
2.3. Liability
•
Assembly, connection and use must be carried out in accordance with the installation standards currently in force.
• The device must be installed in accordance with the rules given in this manual.
•
Failure to observe the rules for installing this device may compromise the device's intrinsic protection.
• The device must be positioned within an installation which complies with the standards currently in force.
•
Any cable which needs to be replaced may only be replaced with a cable having the correct rating.
