SnowEx 6800LT Скачать руководство пользователя страница 51

Страница: 51 / 92

Lit. No. 89451, Rev. 05

May 15, 2022

Smooth Stop/Soft Stop

Smooth stop, or soft stop, is a feature that allows

the blade to coast to a stop when the button/lever

is released. The result is smoother operation,

reduction in shock to the hydraulic system, and an

increase in hose and valve life.

While there are advantages to having this feature,

there are also advantages to temporarily disabling

this feature — for example, to allow for more

precise movements of the blade while operating in

close distances to buildings and other obstacles.

All controls come standard with this feature

ENABLED. To enable/disable this feature, perform

the following steps. Performing the sequence

multiple times will toggle the feature between

enabled and disabled.

OPERATING YOUR SNOWPLOW

Enable/Disable Procedure

1. Turn the vehicle ignition switch to the "ON" or

"ACCESSORY" position. (It is not necessary

to start the vehicle.)

2. Verify that the control power indicator is OFF.

If the power indicator light is red, the control

is ON. Move the ON/OFF switch to "OFF" or

push the ON/OFF button to turn the control

OFF.

3. Move and hold the control lever to the "R"

position or press and hold the "R" button while

turning the control ON. The power indicator

light will turn ON and the FLOAT light will

flash, indicating the status of the feature.

Light Flash Indicators

Light

Description

POWER – Red

Solid ON = Control is ON

FLOAT – Green

1 Flash = Smooth stop enabled
2 Flashes = Smooth stop disabled

Содержание 6800LT





























































































Результаты поиска

Содержание 6800LT

Отзывы:

Похожие инструкции для 6800LT

Бренды по названию

Популярные бренды

SnowEx 6800LT, Руководство пользователя

Результаты поиска

Содержание 6800LT

Отзывы:

Похожие инструкции для 6800LT

Бренды по названию

Популярные бренды