Lit. No. 89451, Rev. 05
43
May 15, 2022
OPERATING YOUR SNOWPLOW
Function Time-Outs
To limit the amount of electrical energy required
from the vehicle, all control functions, except
LOWER/FLOAT, time out (stop) automatically after
a period of time. The blade will coast to a stop.
The time‑outs are written into the programming
and vary by snowplow model.
NOTE: If a control function times out before
desired blade movement is complete, release
the lever to the center position, then move it
back into the desired function.
Automatic Shutdown
The control will automatically turn OFF after being
idle for 20 minutes. To reactivate the control after
a shutdown, move the ON/OFF switch to OFF,
then back to ON.
Optional Control Features
The control ships from the factory with the smooth
stop feature enabled and the one‑touch FLOAT
feature disabled. To change these default settings,
see "Smooth Stop" and "One‑Touch FLOAT" later
in this section of the Owner's Manual.
Control Lever Movement
From the center position, the control lever can be
moved in one of eight directions to control various
movements of the snowplow blade. To change
from one movement of the blade to another, the
control lever must be moved back to the center
position before selecting the desired function.
Whenever the lever is released, it should spring
back into the center position to stop any blade
movement.
Содержание 6800LT
Страница 3: ......
