Lit. No. 89451, Rev. 05
22
May 15, 2022
GETTING TO KNOW YOUR SNOWPLOW
CAB CONTROLS
SnowEx
®
snowplows come equipped
with one of two special controls: the
POWER GRIP™ hand‑held control or a
joystick‑style control.
The POWER PLOW™ snowplow controls allow
you to go from a WIDE PASS™ position, to a
BUCKET BLADE™ (scoop) position, to a straight
blade, all at the touch of a button or with a single
lever movement.
The HDV™ snowplow controls allow you to go
from a V‑plow to a BUCKET BLADE (scoop)
position, to a straight blade, all at the touch of a
button or with a single lever movement.
The vehicle ignition (key) switch controls a fused
circuit that powers your cab control directly from the
battery. The control is backlit, which will illuminate
when the vehicle is turned to ACC or ON.
The ON/OFF button on the cab control allows
you to turn OFF the control and prevent blade
movement even when the ignition switch is ON.
Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. The control backlight will
illuminate.
Press the ON/OFF button on the control. The
power indicator light glows red, indicating the
control is ON. The power indicator light glows
red whenever the control and the vehicle ignition
switch are both ON and the electrical connections
to the snowplow are completed.
All controls are protected by a replaceable fuse
located in the under‑hood snowplow electrical
system. See "Fuse Replacement" in the
Maintenance section of this manual.
WARNING
To prevent accidental movement of
the blade, always turn the control OFF
whenever the snowplow is not in use. The
power indicator light will turn OFF.
Содержание 6800LT
Страница 3: ......