Lit. No. 89451, Rev. 05
48
May 15, 2022
OPERATING YOUR SNOWPLOW
SECURITY GUARD™ System
Activation & Establishing a 4-Digit
Security Code
NOTE: The snowplow must be attached to the
vehicle and all the electrical connections must
be connected prior to activating the security
code function.
The SECURITY GUARD feature was developed
as an electrical anti‑theft system. It provides a
deterrent from theft and/or non‑permitted use by
allowing you to electronically lock the snowplow's
hydraulic functions.
All multiplex snowplow controls come equipped
with the SECURITY GUARD system. To use
this function, you must complete the activation
process.
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. The control backlight
will illuminate. (It is not necessary to start the
vehicle.)
2. Verify that the control power indicator is OFF.
If the power indicator light is red, the control is
ON. Move the ON/OFF switch to "OFF" or push
the ON/OFF button to turn the control OFF.
3. To activate the SECURITY GUARD mode,
move the control lever to the #1 position or
press the #1 button four consecutive times,
then move the control lever to the #4 position
or press the #4 button four times (sequence:
1, 1, 1, 1, 4, 4, 4, 4). The green FLOAT light
will flash quickly and the red power indicator
light will turn ON, indicating that the system is
ready to accept your 4‑digit security code.
Enter your 4‑digit security code by moving the
control lever to (or pressing the button for) any
of the eight following positions: UP, DOWN,
LEFT, RIGHT, 1, 2, 3, or 4.
Содержание 6800LT
Страница 3: ......
