Lit. No. 89451, Rev. 05
46
May 15, 2022
OPERATING YOUR SNOWPLOW
Wing Positions
Moving the control lever from the center position
toward the words "WING IN/OUT", on either
side of the face of the control body will cause
either wing to move independently of the other as
described in the following table.
NOTE: If a control function times out before
desired blade movement is complete, release
the lever to the center position, then move it
back into the desired function.
SECURITY GUARD™ System (1, 2, 3, 4)
Moving the control lever from the center position
toward any of the four numbers on the face of the
control will also operate the SECURITY GUARD
system. See "SECURITY GUARD System" in this
section for more information.
Function Description of Operation
L WING
IN/OUT
Move the control lever toward the
left
side
of
LOWER
on the control face to move
the left wing. The first time the lever is
moved into the slot after the control is
turned ON or another function is used,
the wing will extend. Repeated use of
the lever in the same slot, without using
another function, results in movement in
the opposite direction from the previous
movement.
R WING
IN/OUT
Move the control lever toward the
right
side of
LOWER
on the control face to
move the right wing. The first time the
lever is moved into the slot after the
control is turned ON or another function is
used, the wing will extend. Repeated use
of the lever in the same slot, without using
another function, results in movement in
the opposite direction from the previous
movement.
Содержание 6800LT
Страница 3: ......
