Lit. No. 89451, Rev. 05
49
May 15, 2022
OPERATING YOUR SNOWPLOW
Manual Unlock
If the SECURITY GUARD system is activated
and you are using a control with a different 4-digit
code than the established security code, you will
be required to manually enter the 4‑digit security
code before operating a locked snowplow.
1. Turn the vehicle ignition switch to the "ON" or
"ACCESSORY" position. The control backlight
will illuminate.
2. Move the ON/OFF switch to the "ON" position
or push the ON/OFF button to switch the
control ON.
3.
The power indicator light will flash rapidly,
indicating that the snowplow is locked.
4. Enter the 4‑digit security code.
Once you have entered your 4‑digit
security code, the FLOAT light will stop
flashing and the power indicator light will
turn OFF. This indicates that your 4‑digit
security code is entered and stored in the
SECURITY GUARD™ system.
NOTE: If the control is turned ON prior to
completing the programming procedure, your
4-digit security code will be cancelled.
4. Once a 4‑digit security code is established,
the SECURITY GUARD system will recognize
any control that has been programmed with
the same 4‑digit security code. If a control
not programmed with the correct 4‑digit code
is connected to the system, the established
security code will have to be entered manually
before the snowplow can be activated (see the
Manual Unlock procedure).
Содержание 6800LT
Страница 3: ......
