IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 46
© 2017 SAM
5.21 Logging - FPGA
Information on various parameters can be made available to a logging device connected to
the RollCall network. Each logging page comprises three columns:
•
Log Enable
- Select the check boxes that correspond to the parameters for which log
information should be collected.
•
Log Field
- Displays the name of the logging field.
•
Log Value
- Displays the current log value.
The information below describes the various parameters available for logging.
Where N is the input number
Figure 26
Logging - FPGA Page
Log Field
Description
TEMP_N_NAME=
Reports temperature sensor name.
TEMP_N_CELSIUS=
Reports current temperature sensor reading.
VOLTAGE_N_NAME=
Reports voltage sensor name.
VOLTAGE_N_VALUE=
Reports current voltage reading.
