IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 17
© 2017 SAM
5.
RollCall Control Panel
This section contains information on using IQEDGE with RollCall.
For help with general use of the RollCall application, open the user manual by clicking the
button on the main RollCall toolbar.
5.1 Terminology
The following terms are used in this document:
5.2 Navigating Pages in the RollCall Template
The RollCall template has a number of pages, each of which can be selected from the list at
the top left of the display area. Right-clicking anywhere on the pages will also open a page
view list, allowing quick access to any of the pages.
5.2.1 Template Pages
The following pages are available:
•
Configuration
- See section 5.4.
•
Edge Configuration
- See section 5.5
•
Time Sync Configuration
- See section 5.6.
•
TPG (Test Pattern Generator)
- See section 5.7.
•
Counters
- See section 5.8
•
Ethernet 1-3
- See section 5.9.
•
Ethernet 1 and 2 RTP Sender
- See section 5.10.
Term
Description
Essence
A general term used to describe an SDI
component; Video, Audio and Data are all
essences.
Spigot
Generic term for a Source or Destination.
Flow
Sequence of RTP packets of a single
essence.
Source
Originator of one or more flows, ie. a set of
one or more sender spigots.
Destination
Receiver of one or more flows, ie. a set of
one or more receiver spigots.
Figure 4
Template Pages
Pages
list
