IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 19
© 2017 SAM
5.4 Configuration
The
Configuration
page allows basic module parameters to be set.
The following facilities are available from this page:
Figure 6
Configuration Page
Option
Operation
Where Am I
Causes the front-edge LEDs to flash, allowing the module to
be easily identified.
Genlock
Select Genlock type:
•
Network
- click to use a network-based reference.
•
Chassis Reference A
/
B
- click to select an
on-chassis reference.
•
Freerun
- click to allow free running.
GUID
Displays the absolute unique identifier associated with the
module.
