IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 52
© 2017 SAM
5.25.2 Defaults
Provides options to reset the module to its defaults.
5.26 Ethernet Front
The
Ethernet Front
page shows details and status of the on-module Ethernet connector. The
IQEDGE defaults to use of DHCP, but this can be overridden and a static IP address specified
if required.
5.26.1 The Ethernet Pane
The
Ethernet
pane displays details of the currently selected network interface, and allows a
static IP address to be defined. Enter information as required, then click
S
to save. New
settings are applied when
Restart
is clicked.
Option
Operation
Default settings
All controls are reset to their default values,
except
for network configuration and IP addresses.
Factory defaults
All controls are reset to their default values,
including
network configuration and IP addresses.
Figure 31
Ethernet Front Page