IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 36
© 2017 SAM
5.17 Spigot 1-n
A separate page is provided for each spigot. These pages are dynamically configured by the
product, based on the capabilities of the software/firmware versions in use. Pages for output
and input spigots are slightly different.
5.17.1 Output (Transmit) Spigots
The following facilities are available from this page:
Figure 21 Output Spigot Page
Option
Operation
Spigot Pane
Displays spigot direction, slot and lane of the associated
BNC connector, and the overall module status.
The following controls are also available:
•
Disable Extended Headers
- extended header
operation can be disabled for TR-03/TR-04
compatibility. Enable the check box, then click
Take
to disable the extended headers.
•
Num Audio Channels
- select the number of audio
channels present on this spigot.
•
Packet Time
- select the amount of time required to
complete the transmission of each packet.
•
Streaming
- set redundancy options:
•
Dual
- full redundancy, both Primary and
Secondary available.
•
Single
- Primary only, but with all available
bandwidth.
•
A
- Primary only.
•
B
- Secondary only.
•
Format
- select the maximum expected bandwidth
requirement for this spigot.
