IQEDGE
RollCall Control Panel
Issue 1 Rev 1
Page 43
© 2017 SAM
Where N is the item number
LAN_PORT_N_NAME=
Displays the Ethernet port name.
LAN_PORT_N_SPEED=
Displays the Ethernet connection speed. Valid values are:
•
10 Mbit/s Full Duplex
•
10 Mbit/s Half Duplex
•
100 Mbit/s Full Duplex
•
100 Mbit/s Half Duplex
•
1 Gbit/s Full Duplex
•
No Link
LAN_PORT_N_IPADDRESS=
Displays the Ethernet port IP address.
LAN_PORT_N_MACADDRESS= Displays the Ethernet port MAC address.
LAN_PORT_N_STATE=
Displays the Ethernet connection state. Valid values are:
•
Active
•
WARN:Inactive
LAN_PORT_N_TRAFFIC_IN=
Displays speed of traffic received by the Ethernet port.
Values are reported in Kbps, Mbps or Gbps, as
appropriate.
LAN_PORT_N_TRAFFIC_OUT= Displays speed of traffic transmitted by the Ethernet port.
Values are reported in Kbps, Mbps or Gbps, as
appropriate.
LAN_PORT_N_CPU_TRAF_IN_
STATE=
Shows whether the flow of data into the CPU is
satisfactory. Valid values are:
•
OK
•
WARN:LOW DATA
•
FAIL
LAN_PORT_N_CPU_TRAF_
OUT_STATE=
Shows whether the flow of data out of the CPU is
satisfactory. Valid values are:
•
OK
•
WARN:LOW DATA
•
FAIL
LAN_PORT_N_RTP_DIS_
RATE=
Displays RTP discontinuity rate for the Ethernet port.
LAN_PORT_N_LINK_STATE=
Displays the Ethernet link state. Valid values are:
•
OK
•
WARN:DOWN
LAN_PORT_N_MAC_LINK_
STATE=
Identifies whether a (Q)SFP is present. Valid values are:
•
OK
•
FAIL:MISSING
Log Field
Description
