smv MULTI-LIFT SYSTEM, Инструкция по эксплуатации

Страница: 19 / 53

19
CONTROL AND MAINTENANCE
Safety and the good working order of the system also depend on correct and scheduled maintenance .

Warning
After a brief period of running in of the system, check that the screws, nuts, fittings and tubes are correctly tightened:
vibrations can cause dangerous loosening of the above mentioned components.
- Check the correct functioning of the jacks and the chassis brackets.
-
Check that there are no oil leakages in the hydraulic system
- Check that the micro-mechanics and position sensors are functioning by checking the LEDS on the
receiver.
- Check that the buzzer on the black box is functioning by turning the vehicle ignition key to give +12 to
the control panel
- Check that the emergency hand pump is functioning
MAINTENANCE AND DIAGNOSIS OF MAIN TROUBLESHOOTERS
a) Replace oil after the first 100 Hours of service or after the first 1000 cycles and then every 3000 Hours. For
particular and heavy use (automatic and continuous service systems), the oil must be replaced more frequently.
b) Clean the pump suction filter (or, if necessary, the discharge filter) at the same time as the oil is replaced and,
if necessary, replace with a new filter.
c) The guarantee of the Bosch Rexroth – Oil Sistem product will expire if manufacturer specifications are not
followed.

Warning
ALL OPERATIONS DESCRIBED IN THIS MANUAL MUST BE CARRIED OUT BY PROPERLY TRAINED
AND SPECIALISED PERSONNEL. (CONTACT THE SUPPLIER IF NECESSARY).