Smiths Medical 6300, Руководство пользователя

Страница: 7 / 10

Main Screen
-Displays status of pump (STOPPED or
RUN)
Reservoir Volume
-Volume of fluid in reservoir
Units
-Programming units (ml, mg, mcg)
Concentration -
-Concentration of medication in mg/
ml or mcg/ml
Continuous Rate
-Continuous rate of infusion (ml/hr,
mg/hr, mcg/hr)
Demand Dose
-Amount delivered when patient
presses the DOSE key or Remote Dose Button
Dose Lockout
-Amount of time that must elapse
between demand doses (appears if demand dose is
programmed)
Doses Per Hour
-Maximum number of demand doses
allowed in any one hour period (appears if demand dose
is programmed and demand dose lockout is less than
one hour)
Doses Given
-Displays number of demand doses given
since screen was last cleared (appears if demand dose
is programmed)
Doses Attempted
-Displays number of demand doses
attempted since screen was last cleared (appears if
demand dose is programmed
Given
-Total amount of medication delivered since
display was last cleared (ml, mg, mcg)
Air Detector (status only)
-Indicates if air detector is
turned on or off and high or low sensitivity level
Upstream Sensor (status only)
-Indicates if turned
on or off
Programming screens
Keypad
STOP/START Stops and starts the infusion
ENTER/CLEAR Enters or clears displayed value
PRIME Fills tubing with fluid
LOCK Displays or allows changes Lock
Level (security level)
NEXT Advances to next programming
screen


Increases or decreases displayed
values or scrolls through menu items
ON/OFF Turns the pump on or off (low power)
DOSE Delivers demand dose
IN19882EN-112017.indd 7 11/01/18 11:49