7
C. Put Teflon® tape on the male threads
on the street tee
(Item 8)
and install
into the tapped hole on the volute
(see
Photo 10)
.
D. Put Teflon® tape on the male threads
of the gauge piping assembly and
install on the street tee
(Item 8) (see
Photo 11)
.
E. Put Teflon® tape on both ends of the
close nipple
(Item 5)
and install into
the open port of the street tee
(item
8)(see Photo 11).
F. Install the ball valve
(Item 6)
onto the
close nipple
(Item 5) (see Photo 12)
.
G. Wrap the threads of the pipe plug
(Item 7)
with Teflon® tape and install
onto the other end of the ball valve
(see Photo 13)
.
H. Install the gauge tubing back into the
tubing fitting of the gauge piping. Trim
the end of the tubing if necessary
(see
Photo 13)
.
Photo 13
Photo 10
Photo 11
Photo 12
8
5
7
6
8
