10
Your SPYDERCRANE
’
s Remote Controller
Remote Controller Map
#
Switch
Function
1
Remote E
-
Stop
When ACTIVATED, turns OFF the remote controller.
The remote controller CANNOT be turned ON until the remote e
-
stop is deactivated (by ro-
tating the e
-
stop switch clockwise).
2
Power Key/Switch
2
-
position switch; turns the Remote Controller ON and OFF.
3
Remote Mode Button
This button will activate the secondary command modes for the SPYDERCRANE.
The remote mode button must be held down when selecting command functions.
For SPYDERCRANEs running on their ICE, holding the remote mode button and commanding a
BOOM SLEW CLOCKWISE will turn the engine OFF, holding the remote mode button and com-
manding a BOOM SLEW COUNTERCLOCKWISE will re
-
start the engine.
4
Speed Control Button
When pressed, places the SPYDERCRANE into one of three SPEED MODES:
RED (default): Up to 100% engine power can be commanded
Yellow: Up to 50% engine power can be commanded
Green: Up to 10% engine power can be commanded
Only used with SPYDERCRANEs running propane, gasoline, or diesel.
5
Remote Store Hook Button
When PRESSED AND HELD; commands a HOOK STORE; Control Trigger must also be squeezed
to actuate the command.
6
Remote Safety Horn (Start)
Repeatedly PRESS to LINK the Remote Controller with the SPYDERCRANE; also sounds the
SPYDERCRANE
’
s horn.
7
Remote Telescope Control Switch
PRESS UP to command BOOM OUT; PRESS DOWN to command BOOM IN.
8
Remote Winch Control Switch
PRESS UP to command WINCH UP; PRESS DOWN to command WINCH DOWN.
9
Remote Slew Control Switch
PRESS UP to command SLEW LEFT; PRESS DOWN to command SLEW RIGHT.
10
Remote Boom Angle Control
Switch
PRESS UP to command BOOM UP; BOOM DOWN to command BOOM DOWN.
11
Remote Control Trigger
Squeeze to apply hydraulic function to selected command.
