19
The 220V Electrical Powerplant and Power Distribution Box
The 220V Electrical Powerplant
If your SPYDERCRANE is equipped with the 220V Electrical Powerplant, you can run all of the SPYDERCRANE
’
s functions, including trav-
eling, while plugged in to a compatible 220V, 3
-
phase shore power source. On the back of the SPYDERCRANE Operator
’
s Station, the Power
Distribution Box (PDB).
1
2
3
The PDB
1.
Start and Stop Buttons
After the 220V Electrical Powerplant
’
s Power Distribution Box (PDB) has
been plugged into an appropriate shore power source, pushing the green
Start Button on the PDB will start the 220V Electrical Powerplant.
The
red Stop Button on the Power Distribution Box (PDB) of the 220V Electrical
Powerplant will stop the electric motor of the powerplant. of the Load Bar.
2.
PDB Door
The interior of the PDB can be accessed through this door. To open the
door, insert a flat
-
head screwdriver into the door latch slot and turn counter-
clockwise to unlatch.
3.
Power Cord Port
This is the port for inserting the 220V Power Cord.
