3 Guidelines for use
Vision MKII
34
Ultrasonic humidifier the Weightsaver
(optional for fresh meat products)
The Weightsaver keeps the humidity level on the
presentation surface high, which helps maintain
the quality and appearance of the fresh products
during presentation.
The switch for the Weightsaver is located in the
control panel. The humidifier starts automatically
when the water supply and reverse osmosis filter
are activated.
The device is set to 100% capacity at the
factory.
Depending on the length of the display
case (up to max. 4.375 m) the setting can be
reduced with the control knob which is located
in the mains socket rail across from the unit.
For optimum distribution of the humidified
air, the vapour tube is partially plugged at the
factory, through the use of yellow plugs.
Extra plugs are included with the display
case so you can plug certain sections for the
presentation of products that are presented
dry.
For more information about your
Weightsaver please refer to the manual
(included, on the inside of the service panel).
