3 Guidelines for use
Vision MKII
32
Auxiliary equipment
Your Vision is equipped with guide panels
for cables for connecting auxiliary equipment
(e.g. weigh scales/cash registers).
5.
Make a vertical cut from the edge of the
membrane to the cable hole to feed the
plug and lead of the auxiliary equipment
through.
6.
Pass the plug out through the hole in the
mains socket rail in bottom. Connect the
plug of the auxiliary equipment to the
nearest mains socket.
Always accessible so the power can be
disconnected in an emergency.
The cable duct can also be used to run
data cables to your equipment.
There are mains sockets between the rear
wall and the control panel on the serving side.
