2 Transport &
installation
Vision MKII
25
Connecting the drain:
Ø40 mm PVC pipe fitted with flexible Ø40 mm
connection sleeve. Turn the trap 180° so it points
down at floor level between the display case drain
line and the sewer connection.
See the drawing of the floor plan for the
location of the specific connections.
Drain trap at floor level between display
case drain line and the sewer connection
(included).
Final electrical connections
1. Power supply for display case
The electrical connection is made by connecting
the mains feed to the electrical terminal box in the
frame (cable gland size PG16).
2. Power supply for mains sockets
A separate terminal box in the frame.
All the wiring in the display appliance to the
controller and the electrical components has
been preinstalled by the manufacturer.
Any network connection wires are
connected directly to the controllers. Devices
(e.g. cash register/weigh scale) are connected
directly to the network and are not included
(supplied by third parties).
Switch the display case on and off with the
master switch on the switch box.
1)
Terminal box
for mains feed
2) Terminal box
for mains sockets
Master switch
