WD1050
12/04/2010
Pag. 11
5.4. WATER
SUPPLY
The machine is supplied with two water supply pipes that join to a non-return device
inside the machine.
The pipes are designed for connection to cocks with 3/4” gas threaded bushings.
The following pipes (see the picture below) must be connected to water mains:
cold water pipe;
pressurized demineralized water pipe (min. 2 bar - max. 5 bar) – if present.
If demineralized water isn't available: don't connect the demi pipe
to the cold or hot water, leave it disconnected and see the
instructions (paragraph "DEMI WATER SETTINGS" 6.11) in order to
set correctly the demi water parameter.
fig. 3 – Back view of the machine
