WD1050
12/04/2010
Pag. 7
T
EMPERATURE
From 5°C to 40°C
R
ELATIVE HUMIDITY
80% for temperatures up to 31°C with linear diminut ion down to 50%
at the temperature of 40°C
I
NSTALLATION CATEGORY
II
C
LASS TO WHICH
APPLIANCE BELONGS
IIa
(in compliance with the classification criteria established by DIRECTIVE
93/42)
P
OLLUTION DEGREE
2
4.2. LIFTING
AND
HANDLING
Before it leaves the factory, the base of the machine is fixed to a pallet
which is then used to lift and transport the machine itself.
The machine must be handled with a fork-lift truck or transpallet.
Do not use appliances damaged by transport! Consult your dealer if in
doubt.
The appliance must only be installed and connected by personnel
authorized by the manufacturer.
4.3. DOOR
LOCKING
SYSTEM
After unpacking, pay attention to the following:
the machine is equipped with an automatic door locking/unlocking system.
The door is locked. Don’t force the door, but follow the procedure below.
Connect the machine to the mains supply;
push the ON/OFF button (in order to switch on the machine)
push (and hold) the button with the symbol of the key and after some seconds the
door opens
SIGNS ON THE FRONT OF THE MACHINE
Door unlocking
ON / OFF
°C
Temperature
Salt Lack
►
ll
START / PAUSE
or
Heating element on
