WD1050
12/04/2010
Pag. 21
6.10. DATE
AND
TIME
SETUP
The machine is equipped with a real time clock system. This mainly serves for cycle
tracing purposes (cycle archive).
When needed, this clock system may be set up by means of the following procedure
(available only when no programme is running).
•
Press the ON/OFF button (3) to switch on the machine (If any alarm appears on
the display at this stage, ignore it).
•
Turn the programme selector knob (1) to position 8.
•
Press the Door Open button (6) for 4 seconds to enter the setup function
•
According to the position of the programme selector knob the following
parameters can be set/modified:
o
Position 1: YEAR [00-99]
o
Position 2: MONTH [01-12]
o
Position 3: DATE [01-XX] XX is calculated according to the month and
year.
o
Position 4: hour [00-23]
o
Position 5: minutes [00-59]
o
Position 6: Seconds [00-59]
o
Position 7:inactive position - Display Flashing
o
Position 8: inactive position – Display Flashing
•
To increase a value press "°C" (5)
•
To decrease a value press "
►
ll
"
(4)
•
To terminate, turn the programme selector knob (1) to position 8 and press the
Door Open button (6) for 4 seconds.
The new DATE and TIME is now installed.
6.11. DEMI
WATER
SETTING
Demi water may be used when required by the machine (thermodisinfection phases)
and available.
