WD1050
12/04/2010
Pag. 23
•
Process of each Phase
•
End of Cycle time
•
Eventual errors if Cycle terminates incorrectly.
•
‘A
0
’: stands for the thermal disinfection effectiveness;
In the picture below is shown the serial port (WD1050 back view), which the printer
must be connected to.
fig. 5 – WD1050 back – RS232 PORT (printer connection).
6.13. PRINTER
LANGUAGE
How to set the printer language:
•
Switch on the machine.
•
Turn the programme selector knob to position 6.
•
Press the Door Open button ("key" button) for 4 seconds to enter into the setup
function.
•
On the display appears "Lx" – "L" stands for language - "x" is a number: "0" for
Italian, "1" for English.
•
To increase "x" value press °C.
•
To decrease "x" value press
►
ll.
•
To terminate (programme selector knob to position 6) press the Door Open
button for 4 seconds. The new Printer Language setup is now saved.
7. OPERATING INSTRUCTIONS
After the instrument washer has been correctly installed, it must be prepared for
operation in the following way:
•
Pour in regenerating salt (only if necessary, i.e. with water harder than 10°F);
•
Add detergent and neutralizing agent.
