WD1050
12/04/2010
Pag. 9
5. INSTALLATION
IMPORTANT: The machine must be positioned against the wall
(minimum distance 10 cm) and must be installed by a technician
authorized by the manufacturer.
The technician who installs the machine is responsible for the
appliance operating correctly after it has been installed. He is also
obliged to provide the user with all the information required to use
the machine in the correct way.
All adjustments, servicing and so forth, must be carried out with the
appliance disconnected from the electricity main.
The scratch-proof film must be removed from the external steel
surfaces when the appliance is installed.
IT IS STRICTLY FORBIDDEN FOR UNAUTHORIZED PERSONS TO
USE THE MACHINE.
5.1. POSITIONING
The side panels of the machine must adhere to the adjacent furniture and care must
be taken to leave space at the rear: it is therefore advisable for the wall at the back to
be made of brickwork or some other impermeable material.
The machine has pipes to supply and drain off the water. These can be positioned
towards the right or left, depending on the installation requirements.
The machine can also be installed under a work top: this operation must be carried out
by specialized personnel.
5.2. LEVELLING
Once the machine has been set in position, it must be levelled until horizontal (2
degrees tolerance allowed) by either screwing in the feet or unscrewing them.
Correct levelling will ensure that the machine operates in the right way.
5.3. CONNECTION
TO
WATER
MAINS
Prevent the risk of clogging or damage to the appliance: if the water pipe is new or has
remained unused for a long period of time, make sure that the water is limpid and free
from impurities before connecting the machine to the water main.
The pipe is pre-engineered for connection to a cock with 3/4’’ gas threaded union on
both ends.
Insert the supplied filters "A" before connecting the other ends of the pipes to their
respective cocks.
