
User Manual
GW1160 - GW4060 Series
Page 36 - 75
5.2
ACCESS AND PARAMETER MODIFICATION
The two
options
referred to above -
Set
and
Cloc
– are used for accessing and modifying:
1. Appliance parameters,
Set.
2. Date and Time parameters,
Cloc.
The following basic procedure applies to both
options.
Step
Button
Action
1
Start/Stop
– hold down to
access the option required
.
To access the
Set
parameters, hold down until the “
Set
” option appears on the display.
To access the
Cloc
(date and time setting)
parameters, hold down until the
“Cloc
”
option appears on the display.
2
Functions -
Selection of the parameter required (see detail of the parameters in the
points which follow). Note on GW4060 series: a short press on the button
has
the same meaning of the short press on button
Functions
.
3
-
Selection
buttons - Modification of the selected parameter
During modification, the parameter concerned flashes on the display.
4
Start/Stop
– hold down to confirm the modification.
Once the modification has been confirmed the parameter stops flashing and appears
on the display with steady light.
5
Door opening
– hold down to quit the screen for display/modification of the current
parameter.
2
1 - 4
5
3
fig. 25 – Steps for display and modification of the
Set
and
Cloc
parameters:
Access the parameter
: by pressing the
Start/Stop
button
Quit the parameter
: by pressing the
Door opening
button.
fig. 26 –
Set
parameters. Hold down the
Start/Stop
button to access the parameters. Parameter
-1
sets to the dose dispensed by peristaltic pump
P1
.
Use the
Selection
buttons to modify the parameter. Use the
Functions
button to move to another parameter. Confirm changes using the
Start/Stop
button.