Smeg GW01160S Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 86

background image

User Manual

GW2145 - GW1160 - GW4060 - GW4190

Page 55 - 86

GENERAL PRECAUTIONS FOR DETERGENTS

HANDLE DETERGENT CANS WITH CARE

Warning: detergents may be TOXIC.
Refer to the product safety data sheets.

Once a product has run out, replace the empty can with a full one of the same product.
If the product left in the old jerry can is poured into the new one, take care not to overfill the new
cans to ensure that they will not overflow when the suction nozzles are inserted.

Gloves must be worn during transfer of detergents, during fill-ups and during insertion of the
suction nozzles.

Information supplied in compliance with 5.4.3.m, 5.4.4.n and 5.4.4.q IEC61010-2-

040:2005

FIRST AID MEASURES IN CASE OF CONTACT WITH DETERGENTS

Instructions provided in compliance with point 5.4.4.p IEC61010-2-040.
Remove contaminated clothing and put it in a safe place.
Contact with the skin or eyes: wash immediately and thoroughly with water. If possible, apply a
sterile gauze dressing. Seek medical advice.
Swallowing: rinse out the mouth with plenty of water. Seek for medical advice immediately.

DETERGENT SAFETY DATA SHEETS.
Detergent SAFETY DATA SHEETS must be kept:

1.

close to the place where detergents are stored;

2.

close to the appliance.

In easily accessible positions.
The latest versions of the safety data sheets should be requested regularly (e.g. once a year).
Safety data sheets will be supplied by Smeg S.p.A. on request.

DISPOSAL

Information supplied in compliance with point 5.4.4.L of IEC61010-2-040:2005.
DISPOSAL of any product residues and containers (cans and bottles): refer to the “DISPOSAL
ADVICE” section of product safety data sheets.
If mislaid, data sheets may be requested from SMEG S.p.A.
[email protected]
The appliance’s responsible authority must dispose of detergent residues and containers in
accordance with the relevant national or local legislation.

FLAMMABILITY

Always refer to detergent technical data sheets to assess the products’ flammability.

Do not use flammable products in the appliance.

«
...
53
54
55
56
57
...
»

Содержание GW01160S























































































Отзывы:

Нет отзывов

Похожие инструкции для GW01160S

3VT913NA - annexe 1

Бренд: BALAY Страницы: 25

3VT913NA - annexe 1

Бренд: BALAY Страницы: 30

Бренд: BALAY Страницы: 2

Бренд: BALAY Страницы: 2

Бренд: BALAY Страницы: 2

3VB350ID - annexe 1

Бренд: BALAY Страницы: 29

K 3 Premium Power Control

Бренд: Kärcher Страницы: 16

K 3 Premium Power Control

Бренд: Kärcher Страницы: 40

Бренд: Fisher & Paykel Страницы: 7

Бренд: Hyundai power products Страницы: 36

Бренд: Spitwater Страницы: 22

Бренд: Kärcher Страницы: 28

Бренд: Graco Страницы: 32

Бренд: V-ZUG Страницы: 76

AQUALTIS AQ7F 29 I

Бренд: Hotpoint Страницы: 16

Professional & Designer 200 Series

Бренд: Viking Страницы: 12

Бренд: Heartland Страницы: 81

Бренд: Elba Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды