- 34 -
LED display
The meaning of LED indications are as shown in the table below.
LED label
color
lighting conditions
flashing condition
Lights-out
condition
power supply
(PWR)
green
Not reaching Pressure
Ramp Up Duration
or Control Stop
- (not applicable)
Power off
orange in operation mode
in standby mode
communication
(COM)
green
IO-Link communication not
established
IO-Link communication
establishment
Power off
The range of the LED pressure display is different according to the pressure range and the unit of
the display.
unit
700kPa range
MPa
.000 to .A00
Kgf/cm
2
0.00 to A.00
bar
0.00 toA.00
PSI
0 to 150
kPa
0 to A00
(note1)
：
The mark "
｡
" is blinking the decimal point, and it is shown a minus.
(note2)
：
The adjustable pressure range of the product is 700kPa, but the LED pressure display
range can display up to 1000kPa.
(note3)
：
When the digit overflows, the following of "9" are substituted by "A".
(example: The following of 999(kPa) are displayed as A00(kPa), and it shows 1000
kPa.)
(note4)
：
When the display exceeds the lower bound value, "
" is displayed.
(note5)
：
When the display exceeds the upper bound value, "
" is displayed.
