HGMS62 Split Type Genset Controller User Manual Page 45 of 58
9
PARAMETER SETTING
9.1
MENU ITEMS
After controller starting, press
to enter into the parameters setting menu:
1)
Parameters Setting
2)
Language
3)
Event Log
4)
Controller Information
5)
Date and Time
6)
Battery Under Voltage Start
9.2
PARAMETERS SETTING
“00318” can set all parameter items during inputting password. When default password has been
changed, it needs to input the same password with controller for parameter setting via PC software. If
more parameter items need to be set or password is forgotten, such as voltage and current calibration,
please contact with the factory.
NOTES:
a)
Please modify the internal parameters in standby mode (crank conditions, aux. input and output configuration,
multi delays, etc.) otherwise shutdown alarm or other abnormal conditions may appear.
b)
The over threshold must be greater than the under threshold, such as over voltage threshold must be greater than
under voltage threshold; otherwise over voltage and under voltage will occur at the same time.
c)
The over speed threshold must be greater than under speed threshold, otherwise over speed and under speed will
occur at the same time.
d)
Please set return value correctly when setting warning alarm, otherwise alarm cannot occur normally. When setting
over warning. return value should be less than set value; when setting under warning, return value should be
greater than set value.
e)
Generator frequency should be lower value in crank disconnect so as to disconnect starter quickly.
f)
Aux. input 1-9 cannot be set as the same items, otherwise it cannot realize correct function; aux. output 1-4 can be
set as the same items.
9.3
LANGUAGE
This item can select display language as simplified Chinese, English or others, others are defaulted
as Spanish.
9.4
EVENT LOG
Event log can be checked via this item, max can reach 99 pieces.
9.5
CONTROLLER INFORMATION
a)
This interface can display controller develop information, such as software version, hardware
version, issue date.
b)
Press
in this interface can display digital input port and output port status.
